NEWS

DESIGN OF A COMPACT BROADBAND ANTENNA USING CHARACTERISTIC MODE ANALYSIS FOR MICROWAVE APPLICATIONS


(Received: 28-Dec.-2022, Revised: 1-Mar.-2023 , Accepted: 20-Mar.-2023)
A compact broadband antenna of dimensions 27 mm × 28 mm × 1.6 mm and with good impedance matching is designed for high-bandwidth radio systems with a short range. To improve the impedance matching, two rectangular slots are created on the radiating element and the ground plane size is reduced to extend the ultra- wideband frequency band. The antenna bandwidth and radiation performance are analyzed using characteristic mode theory (TCM). The performance is compared to the desired specifications and the shape and size are modified to produce efficient radiation and dominant radiation patterns. The findings clearly demonstrate that the six modes are resonant with (λn=0). This implies that the eigenvalues of the six modes contribute strongly to dominant electromagnetic radiation and have high modal significance values around 1 at their respective frequencies. Furthermore, the characteristic angle indicates that the antenna resonates at 180°, since the six modes intersect the axis line at 180° at their respective frequencies. Experimental results show a bandwidth of 109.7% between 5.64 and 19.34 GHz, a maximum gain of 6.3 dB and a maximum efficiency of approximately 86.5%. These results make this antenna a versatile and effective choice for a wide variety of communications and electronic applications and easy to install in narrow spaces due to its easy design characteristics, small size and light weight.

[1] M. Windler and D. G. Camell, "Measuring Antennas above 1 GHz," Proc. of the 14th Intl. Electromagnetic Compatibility (EMC) Symposium, NIST, pp. 91–95, Feb. 2001.

[2] M. Gupta and V. Mathur, "Wheel Shaped Modified Fractal Antenna Realization for Wireless Communications," AEU - Int. J. Electronics and Communications, vol. 79, pp. 257–266, Sep. 2017.

[3] A. A. Deshmukh and P. V. Mohadikar, "Modified Rectangular Shape Patch Antennas for Ultra-wide Band and Notch Characteristics Response," Microwave and Optical Technol. Letters, vol. 59, no. 7, pp. 1524–1529, 2017.

[4] A. Raza, W. Lin, Y. Chen et al., "Wideband Tapered Slot Antenna for Applications in Ground Penetrating Radar," Microwave and Optical Technol. Letters, vol. 62, no. 7, pp. 2562– 2568, 2020.

[5] Y. Zehforoosh, M. Mohammadifar, A. Houshang Mohammadifar and S. R. Ebadzadeh, "Designing Four Notched Bands Microstrip Antenna for UWB Applications, Assessed by Analytic Hierarchy Process Method," J. Microwave, Optoelectronics and Electromagnetic Appl., vol. 16, no. 3, pp. 765–776, Sep. 2017.

[6] H. Du, X. Yu, H. Zhang and P. Chen, "Design of Broadband and Dual‐polarized Dielectric‐filled Pyramidal Horn Antenna Based on Substrate‐integrated Waveguide," Microwave and Optical Technology Letters, vol. 61, no. 3, pp. 702-708, 2019.

[7] A. Chaabane and M. Guerroui, "Printed UWB Rhombus Shaped Antenna for GPR Applications," Iranian J. of Electrical and Electronics Eng., vol. 17, no. 4, pp. 2041–2041, Dec. 2021.

[8] B. Bhandari, A. Kumar, T. Giri and D. Shah, "Design of CPW-fed Triangular Shaped UWB Antenna for Multiband Applications," Int. Research J. of Eng. and Tech. (IRJET), vol. 4, no. 7, pp. 2123-2128, Jul. 2017.

[9] C.-J. Wu, I.-F. Chen, C.-M. Peng, W.-Y. Tsai and J.-S. Sun, "A Compact Fractal-shaped O-ring Monopole Antenna for Modern Broadband Wireless Applications," WSEAS Trans. Electron., vol. 12, pp. 93–99, 2021.

[10] K. R. Xiang and F.C. Chen "A Method for Increasing the Bandwidth of Slot and Patch Antennas Using Grid‐slotted Patch," Int. J. of RF Microwave Computer-aided Engineering, vol. 31, no. 2, p. e22510, 2021.

[11] J.-Y. Deng et al., "Bandwidth and Gain Improvements of Low-profile H-shaped Microstrip Patch Antenna under Quadruple-mode Resonance," Int. J. RF Microw. Comp.-Aided Eng., vol. 30, no. 10, p. e22372, 2020.

[12] N. M. Awad and M. K. Abdelazeez, "Multi-slot Micro-strip Antenna for Ultra-wide Band Applications," J. of King Saud Uni. - Engineering Sciences, vol. 30, no. 1, pp. 38–45, Jan. 2018.

[13] P. M. Paul, K. Kandasamy, M. S. Sharawi and B. Majumder, "Dispersion-engineered Transmission Line Loaded Slot Antenna for UWB Applications," IEEE Antennas and Wireless Propagation Letters, vol. 18, no. 2, pp. 323–327, Feb. 2019.

[14] S. Mohandoss et al., "Fractal Based Ultra-wideband Antenna Development for Wireless Personal Area Communication Applications," AEU-Int. J. Electronics and Communications, vol. 93, pp. 95–102, Sep. 2018.

[15] H. S. Mewara et al., "A Printed Monopole Ellipzoidal UWB Antenna with Four Band Rejection Characteristics," AEU-Int. J. Electronics and Communications, vol. 83, pp. 222– 232, Jan. 2018.

[16] U. Ullah and S. Koziel, "A Novel Coplanar-strip-based Excitation Technique for Design of Broadband Circularly Polarization Antennas with Wide 3 dB Axial Ratio Beamwidth," IEEE Trans. on Antennas and Propagation, vol. 67, no. 6, pp. 4224–4229, Jun. 2019.

[17] W. An, S. Li, W. Sun and Y. Li, "Low-profile Wideband Microstrip Antenna Based on Multiple Modes with Partial Apertures," IEEE Antennas and Wireless Propagation Letters, vol. 18, no. 7, pp. 1372- 1376, 2019.

[18] Y. Sun and H. Jin, "Design of Broadband Endfire Antenna with Split-ring Resonator (SRR) Structures," Proc. of the 2019 IEEE Int. Conf. on Computational Electromagnetics (ICCEM), pp. 1–3, DOI: 10.1109/COMPEM.2019.8779224, Shanghai, China, Mar. 2019.

[19] R. S. Daniel, "Broadband μ-negative Antenna Using ELC Unit Cell," AEU-Int. J. Electronics and Communications, vol. 118, p. 153147, May 2020.[20] M. Moore, Z. Iqbal and S. Lim, "A Size-reduced, Broadband, Bidirectional, Circularly Polarized Antenna for Potential Application in WLAN, WiMAX, 4G and 5G Frequency Bands," Progress In Electromagnetics Research C, vol. 114, pp. 1–11, Jan. 2021.

[21] O. Benkhadda et al., "Compact Broadband Antenna with Vicsek Fractal Slots for WLAN and WiMAX Applications," Applied Sciences, vol. 12, no. 3, Article no. 3, Jan. 2022.

[22] C. Güler, S. E. B. Keski̇n and R. B.aymaz, "The Development of Broadband Microstrip Patch Antenna for Wireless Applications," Bitlis Eren University J. of Science, vol. 11, no. 3, Article no. 3, Sep. 2022.

[23] J. Budania, M. Sharma, R. Yadav and R. Dhara, "Characteristic Mode Analysis and Design of Broadband Circularly Polarized CPW-fed Compact Printed Square Slot Antenna," Progress in Electromagnetics Research M, vol. 94, pp. 105-118, 2020.

[24] R. Harrington and J. Mautz, "Theory of Characteristic Modes for Conducting Bodies," IEEE Trans. on Antennas and Propagation, vol. 19, no. 5, pp. 622–628, Sep. 1971.

[25] Y. Chang and R. Harrington, "A Surface Formulation for Characteristic Modes of Material Bodies," IEEE Trans. on Antennas and Propagation, vol. 25, no. 6, pp. 789–795, Nov. 1977.

[26] R. F. Harrington and J. R. Mautz, "Characteristic Modes for Aperture Problems," IEEE Trans. on Microwave Theory and Techniques, vol. 33, no. 6, pp. 500–505, Jun. 1985.

[27] M. Cabedo-Fabres, E. Antonino-Daviu, A. Valero-Nogueira and M. F. Bataller, "The Theory of Characteristic Modes Revisited: A Contribution to the Design of Antennas for Modern Applications," IEEE Antennas and Propagation Magazine, vol. 49, no. 5, pp. 52–68, Oct. 2007.

[28] Y. Wu, H. Lin, J. Xiong, J. Hou, R. Zhou, F. Deng and R. Tang, "A Broadband Metamaterial Absorber Design Using Characteristic Modes Analysis," Journal of Applied Physics, vol. 129, no. 13, p. 134902, 2021.

[29] F. H. Lin and Z. N. Chen, "Low-profile Wideband Metasurface Antennas Using Characteristic Mode Analysis," IEEE Transactions on Antennas and Propagation, vol. 65, no. 4, pp. 1706-1713, 2017.

[30] T. Li and Z. N. Chen, "Wideband Sidelobe-level Reduced Ka-Band Metasurface Antenna Array Fed by Substrate-integrated Gap Waveguide Using Characteristic Mode Analysis," IEEE Transactions on Antennas and Propagation, vol. 68, no. 3, pp. 1356-1365, 2020.